Technical Articles

IP Probes, Fingers and Pins The Corresponding Standard

Description	European standards	Other standards
JOINTED TEST FINGER	EN 60529 FIG. 1 EN 61032 FIG. 2 EN 60335-1 EN 60335-1/A13 23-50 FIG. 21	IEC 60529 IEC 61032 IEC 884-1
JOINTED TEST FINGER	EN 60335-2-64 Fig. 1
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50 N	EN 60950 EN 60335-1	IEC 60335-1 Fig. 10
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50-75 N
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-100 N	EN 61032 Fig. 7	IEC 60065 Fig. 3b
SHORT TEST PIN	EN 61032 Fig. 9 EN 60335-1 EN 60601-1	IEC 60335-1 Fig. 2
LONG TEST PIN	EN 61032	IEC 61032
TEST MANDREL	EN 61032 Fig. 16 EN 60335-1	IEC 60335-1 Fig. 3
TEST NEEDLE Ø 1 mm , force 1 N	CEI 23-50 Fig. 10	IEC 883
TEST NEEDLE Ø 2, 5 mm , force 3 N
SHORT CIRCUIT TESTER, 48 V. with signal light	EN 60335-1 par. 8.1	IEC 60529 par. 11.89 IEC 60598-1 par. 6.92
TEST SPHERE Ø 50 mm with handle	EN 60529 EN 61032 Fig. 1	IEC 60529 IEC 61032
TEST NAIL to be applied to the rigid test finger	EN 60335-1 Fig. 7	IEC 60335-1 Fig. 7
TEST ROD Ø 2, 5 mm , length 100 mm , with stopping ball Ø 35 mm	EN 60529 EN 61032 Fig. 3	IEC 60529 IEC 61032
TEST ROD Ø 1 mm , length 100 mm , with stopping ball Ø 35 mm	EN 60529 EN 61032 Fig. 4	IEC 60529 IEC 61032
TEST PROBE Ø 12 mm , length. 80 mm with dynamometric handgrip and reference marks to forces of 10-20-30 -40-50 N	EN 60950 Fig. 16	IEC 61010- par. 8.1.1
SMALL FINGER PROBE Ø 8, 6 mm	EN 61032 Fig. 12 EN 60335-2-75
SMALL FINGER PROBE ? 5, 6 mm	EN 61032 Fig. 13 EN 60335-2-75	IEC61032 IEC60065
ACCESS PROBE TO HAZARDOUS FOOD WASTE DISPOSAL UNITS	EN 61032	CEI IEC 61032, FIG. 14 – PROBE 31
TEST BAR WIDTH 50MM, 5MM THICK ,175MM LONG	EN61032	IEC 61032 FIG17 PROBE43
TEST BAR WIDTH 3MM, 1MM THICK ,80MM LONG	EN61032	IEC 61032 FIG10 PROBE14
TEST NEEDLE Ø 0.5 MM, 20MM LONG	EN61032	IEC 61032 FIG11 PROBE17
"UL" FINGER PROBE		ACCORDING TO UL 1026, FIG. 6.2 ,UL508 ,FIG.6.4, UL153,FIG23.1;UL 982, FIG. 7.1 UL507 FIG9.2, UL1310-1994
HAZARDOUS MOVING PARTS PROBE		UL507 FIG8.1， PA160B
RIGIDITY TEST ROD PROBE，Ø 25.4 MM		UL507 FIG8.2 S2140A
UNINSULATED LIVE PARTS PROBE		UL507 FIG1.1
TACCESSIBILITY PROBE/WEDGE		UL 60950-1, FIG. NAF.2, FIG. NAF.3
BLUNT-END PROBE		UL1310 FIG14.4(S3252)
ENAMELED WIRE PROBE		UL1278 FIG 8.2(PA140A),UL398 FIG 8.2(PA170B) ,UL507(PA170D)
TEST HOOK		CEI EN 60601-1, FIG. 1 UL 6500, FIG. 8.2
ULTEST FINGER
UL TEST PROBE		UL1287 FIG，10.1
UL TEST PROBE		UL1287 FIG，10.2
UL TEST PROBE		UL1287 FIG，10.3
UL TEST PROBE		UL1287 FIG，10.4
JOINTED IEC TEST FINGER		IEC6 0335-2-14
JOINTED IEC TEST FINGER （Ø 125MM）
TEST PROBE PROBE32		IEC61032
IEC STEEL ROD Ø 4 MM, 100 MM LONG	EN61010-1	EC60065 9.1.3, IEC1010
IEC STEEL ROD Ø 3 MM, 100 MM LONG	EN61010-1,CSA1010-1	IEC1010, ,UL31010-1
TEST PORBE ABOUT IEC60950		IEC60950
TEST PORBE ABOUT IEC60601		IEC60601
TEST PORBE ABOUT IEC61010		IEC61010
TEST PORBE ABOUT IEC60335		IEC60335
TEST PORBE ABOUT IEC60529		IEC60529